Skip to Content
Search For Jobs

What's your expertise?

Where should we look?

Zip Code

25 miles

25 miles
50 miles
100 miles
500 miles
1000 miles
2500 miles

Job Type

All
Contract (268)
Permanent (60)

Category

All
Engineering (299)
Finance (118)
IT (667)
Other Opportunity (133)
Main Content

Manufacturing Test Engineer

Category:Contract
Location: Palo Alto, California 94025
Posted:Tue, May 14, 2019
Salary:Up to US$0.0 per hour
Apply for this Job

Description:
Drives improvement and corrective action in the quality of components sourced from outside suppliers. Provides technical support in the selection of suppliers. Develops acceptance criteria for materials. Monitors supplier performance to drive supplier corrective action, manufacturing yield issues and field failures. Responsible for compliance with applicable Corporate and Divisional Policies and procedures. 1. Assess potential new suppliers for technical, quality and manufacturing capabilities. Provides technical support for the introduction of components from a new supplier. 2. Generates and maintains incoming inspection procedures. Trains inspectors to these procedures. 3. Develops and/or sources inspection tools and equipment. 4. Assists in generating component specifications. 5. Generate test protocols, monitor testing, issue qualification test reports and approve components for use in products. 6. Provide input to Design Engineering on new component technology and assist in component selection with quality and reliability analysis.; 7. Analyzes incoming material defects. Dispositions and drives corrective action as necessary. Communicates issues to suppliers. 8. Reviews new design specifications and provides input from component quality and manufacturability perspective. 9. Investigates field failures related to supplier materials. Develop corrective action plan where necessary. Will perform this job in a quality system environment. Failure to adequately perform tasks can result in noncompliance with governmental regulations. May lead a project team of moderate scope. Provides guidance to less experienced staff. BS degree in engineering or related scientific field plus 5-8 years of related work experience with a good understanding of specified functional area, or Master's degree with 0-2 years of related work experience.

Experis is an Equal Opportunity Employer (EOE/AA)

Apply for this Job