Job Title:Building Engineer General Information Job Description: INTAKE NOTES: This is a STATIONARY Building Engineer position that has the potential to become long term. The HM is looking for a qualified Boilers Operator with at least 3 years of training and experience with operating high-pressure steam in a hospital environment. Comparable experience would be experience in the Navy or in a manufacturing or processing environment. This individual will need to have met the requirements of a Boiler Plant Operator. Incumbent must demonstrate knowledge and competency in boiler plant operations, systems, theory, safety devices, and safety topics. High school diploma or general education degree (GED) and a minimum of four years of related experience and/or trade school training.
Building Engineer Job Description: INTAKE NOTES:
This is a MOBILE, SHORT TERM Building Engineer assignment for the end client in the Dallas, TX area.
The assignment is due to coverage for full time employees on leave, and is expected to last until the end of August.
A company vehicle will be provided.
Universal CFC certification is required along with extensive HVAC knowledge to include preventative maintenance and service on HVAC equipment in a commercial setting.
General maintenance skills also required to include plumbing, electrical, and carpentry.
PPE will be provided if necessary.
High school diploma or general education degree (GED) and a minimum of four years of related experience and/or trade school training.
Universal CFC certification required.
Additional certification in one or more of the following: electrical, mechanical, HVAC and refrigeration systems, process controls, mechanical power transmissions, painting, plumbing, carpentry or engine repair.
This CM position is line and antenna focused; responsible for all construction activities on assigned telecommunication sites. You will be leading a team environment helping with installation of towers, mounts, antennas, feed lines, electronic cabinets, shelters, etc.Primary Responsibilities: Serve as a point of contact between project management and field execuction of installation of towers, mounts, antennas, feed lines, electronic cabinets, shelters, and more Provide oversight during construction of assigned sites and ensure compliance with all carrier specifications Responsible for customer satisfaction and the fulfillment of customer expectations Read plans, blue prints, diagrams, sketches, Interpret construction drawings (CDs) and RFDS to create an order of magnitude Create bill of materials (BOM) based upon the scope of work and construction plans in advance of deployment Coordinate logistics (track site material delivery and return) and coordinate work authorizations and purchase orders Establish, manage, and maintain subcontractor and GC relationships Oversee internal and external crew members to ensure proper techniques on line/antenna install and maintanence Monitor of daily production reports and complete performance evaluations of crew members Work with project coordinators to submit daily reports to appropriate customers Work with project coordinators to review all site specific closeout documentation for accuracy and ensure timely submissionExperience: (5) years microwave and wireless site construction experience (1) years civil telecom/wireless construction management experience (1) years experience working on telecommunications projects with emphasis on Antenna and Line Installs/Upgrades Thorough knowledge of MS Office suite.
This position is responsible for producing cost estimates from conceptual phases through development by deciphering designs and working with others to produce estimates, bids, and job costs for projects. Primary Responsibilities: Review specification information and other documentation to prepare time, cost, materials, and labor estimates Organize bid components to ensure accuracy and completeness, including material procurement and cost negotiations Compile and maintain material cost databases Perform takeoffs on blueprints (i.e. circuit and scale drawings, count devices and equipment,etc) and pre-bid walks Analyze, evaluate, and compare cost estimates versus actual costs, trends, and patterns to improve accuracy profitability Consult with clients, vendors, project teams, and subcontractors to discuss scope of work and formulate estimates Create, publish, and distribute reports as assigned by management (i.e.
Experis Manpower Group, is currently looking to fill several Material Handler roles for a client of ours in Irving, Texas. Job: Material Handler Term: 6 monthsPay Rate: $11.72/hr.Shift: Monday - Friday 9am - 5:30pm CST, Workers will work 11 days on and 11 days offSUMMARY Responsible for unpacking equipment and preparing for software download that will be performed by a technician. Employee will repack equipment after download, and then prepare the material for shipment. Contractor should have the ability to accurately verify and understand detailed information. Contractor should be able to focus on processing orders and avoid distractions. This position also involves normal house cleaning such as removing trash, bailing cardboard/plastic, and general tidying as needed.Responsibilities Requires use of Wire Routing and Crimping / Manual Dexterity Unpacking and Sorting materials Setting up materials in staging area Assembling stands Verification of Assembly Packing and Labeling Additional Responsibilities require IOS Downloads for IPhone and IPad and assistance with staging these devices specific for Store Sites.
Summary of Job Description: Operates, inspects, and maintains all HVAC, mechanical, electrical and plumbing equipment and systems in assigned facilities to obtain most efficient operating results and life expectancy. Assures that equipment is being maintained in an energy efficient, safe manner and down time is reduced to a minimum by anticipation of necessary repairs keeping records of past operating experiences. Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc. Primary Responsibilities: Performance of ongoing preventive and repair response work orders on facility mechanical, electrical and other installed systems, equipment, and other components.
The Mobile Maintenance Mechanic provides electrical and mechanical support for the assigned buildings. This role has wide ranging responsibilities, including low voltage power, preventive maintenance, emergency response, general maintenance, carpentry, plumbing system, and vendor management. Primary responsibilities will include facility subsystems and support tools. ESSENTIAL FUNCTIONS Maintain compliance to State, County, or City Ordinances, Codes, or Laws. Comply with all safety procedures. Comply with all policies for the safe storage, usage, and disposal of hazardous materials. Participate in ongoing technical, safety, and operational process training programs General Interior Maintenance: hang pictures, install keyboard trays, repair office furniture systems, etc. Special Tasks: painting, locksmith work, tenant services requests, etc., and general maintenance.
BASIC PURPOSE AND SCOPE OF POSITION Assembly, test and operate existing and prototype equipment for performance, durability, reliability customer-fitness-for-use, and dealer-install-time tests. Perform mechanical, electrical, and diagnostic work in the shop and assure a safe shop work environment. Understand customer uses and abuses of the Kubota products and adjust the products to be robust against the abuses.PRINCIPAL ACTIVITIES:
This position does the following in accordance with all applicable Federal, State and local laws / regulations and the Companys policies, procedures and guidelines:1.Assembles and operates equipment for performance and durability tests for product engineers according to the specs of the equipment (prototype and production units).
This position is responsible for coordinating and maintaining the administrative functions of the project while providing strong support to the Project Manager, including planning, preparing, organizing, and maintaining project documentation. Primary Responsibilities: Assist with planning, implementation and delivery of active projects Track project deliverables and due dates Develop and maintain accurate and complete spreadsheets and files for projects Support daily activities of Managers Handle day to day project level client communication Manage process of material requisitions and packing slips to corporate office for material received Scan, file, create, and distribute various project documents Assist with the preparation and submittal of client packages Perform data entry and word processing as needed Other duties as assigned JOB REQUIREMENTSQualificationsEducation: Associate's degree or equivalent from two-year college or technical school; or equivalent combination of education and experienceREQUIRED Experience: One-year experience in the wireless telecommunications industry or similar experience One-year experience in a project coordination positionUnderstanding of construction methods and materials - Experience collecting, compiling and verifying all customer documents, close-outs, and surveys Microsoft Office proficiency Data entry and word processing Strong work ethic / self motivated Vendor contact and follow up Client contact and follow up Basic administrative duties/ office work Attention to detail Excellent verbal and written communication skills Ability to work independently as well as in a team environment Ability to present self in a professional manner and represent the company image Able to multi-task with easeDESIRED EXPERIENCE: Experience conducting due diligence review, amendment and change orders to surveys Basic comprehension of cell site surveys/cell site construction Basic abilities in reading and interpreting telecom cell site plans and shelter specifications Basic Visio experience to update surveys and drawings for field personnel resulting in accurate installation of telecommunication projects is highly desired If no Visio experience, must be able to master new technologies quickly and learn with minimal training Adobe experience also desired Physical Requirements: Must be able to pass pre-employment screening that includes background and drug testing Must have a valid drivers license and a driving record that meets Company requirements Sitting at a desk for 6-8 hours a day Working on a computer for 6-8 hours a day May be required to work long and unpredictable hours
Experis is an Equal Opportunity Employer
PRINCIPAL ACTIVITIES: This position does the following in accordance with all applicable Federal, State and local laws / regulations and the Companys policies, procedures and guidelines: 1. As the Harvesting Application Specialist, will bridge the R&D functional area with Marketing, Product Management and Service. 2. Team with R&D and PM to build specifications/LOR (List of Requirements) for all projects related to North America (adaptations, local variants, New Product Development projects also with Harvesting Systems Division R&D representing the North American region). 3. Support Project Management in product configuration definition and price list structure/elements. 4. Contribute conceptual ideas and design direction into the projects with NPD (New Product Development) team and R&D management both regionally and on division-level.
Title: Job Title: Embedded Automotive Systems Engineer
Location: Denton, TX
Contract/Perm: Direct Hire
Hourly Rate/Salary: $115,000 (Maximum)
Collaborates with Engineering and validation teams Conducts design and readiness reviews Manages supplier activities and escalates when quality factors are detected Provides support to production with root cause analysis and problem solving for all SW issues Up to 50% domestic travel Embedded product development expertise - Required Knowledge of product development and testing within regulated environment AGILE development background Strong communication and negotiation skills- Required Understanding of technical issues and ability to communicated to technical and non-technical team members - Required Experience with test and verification tools - DOORS, Matlab/Simulink, Etc
Bachelor's Degree in Science related field - minimum US Citizen/Green Card Holder ONLY!
This position is responsible for assisting the Techs, CMs and Senior Management with the oversight of all cell site construction (Antenna and Line Installs/Upgrades) including scope, planning, budgeting, safety, quality, scheduling, staffing, material handling, implementation, and customer satisfaction. Primary Responsibilities: Serve as a point of contact between project management and construction execution (field-based teams) Conduct site walks, evaluate conditions, and prepare cost estimates accordingly Create bill of materials based upon the Antenna and Line Install/Upgrade scope of work and construction plans in advance of deployment Coordinate and track site material delivery and return Ensure safety and quality standards are met Report project status and performance data to Senior Management/Director as required Establish, manage, and maintain subcontractor and GC relationships Review project costs for accuracy including but not limited to time, materials, and subcontractors Ensure permitting, inspections, and code compliance is completed as needed Review all site specific closeout documentation prepared by project coordinator for accuracy and ensure timely submissionSupervisory Job Duties: Carries out supervisory duties in accordance with the Companys objectives, policies, and applicable laws.
Follow us on Twitter
Friend us on FaceBook
Find us on LinkedIn